Degreasing rust agent rational indicators

Degreasing rust agent rational indicators

1, Appearance: transparent liquid

2, density (g / cm3): 1.2 ± 0.02

3, PH value: 4.0 ± 0.02

4, the ratio of concentration: 25-50%.

Used to remove the workpiece, the surface of the equipment, a variety of lubricants, grease, anti-rust oil, grease, polishing paste, grinding paste, especially for parts after stretching or drawing the surface of the residual tensile oil, The removal of degreasing degreasing step by step, with oil removal thoroughly, cost-effective and so on, so that the product surface clean and clean.

Two prominent features

This product is used to remove parts, equipment, a variety of surface oil, degreasing step by step to complete, the process is simple, easy to operate, and ultimately make the product clean surface. Neutral, the skin, the workpiece, the equipment without harm, with the use of low concentration, degreasing speed, low cost, high efficiency, completely remove the dirt, the higher the temperature, the stronger the cleaning capacity and so on.

Three scope of application

Degreasing rust agent widely used in stainless steel, carbon steel, aluminum, copper and other metals and ceramics, plastics and other non-metallic; neutral products, this product is two-phase cleaning method. Mild oil can be used at room temperature, thoroughly remove the surface of the grease, with the use of low concentration, long life, degreasing speed (3 to 5 minutes), low cost, high efficiency.

Three physical and chemical indicators

Degreasing rust agent Appearance Blue transparent liquid PH value 7

Four use method

1, the degreasing rust agent prepared into 10-20% (weight ratio) solution (the higher the concentration of oil removal effect better), room temperature or heated to 30 ℃ -60 ℃ (the higher the temperature the better the oil removal effect) use;

2, the workpiece to be treated soaked in the solution scrub or scrub the metal, or scrub for 10 to 20 minutes, or cleaning machine spray cleaning to be processed pieces 3 to 5 minutes, or in the ultrasonic cleaning equipment will be equipped with the above Solution heated to 30 ℃ -60 ℃, start the ultrasonic equipment cleaning 3 to 15 minutes to clean the oil until the clean water can be clean.

Five precautions

Degreasing or stir well after use; do not let children contact, do not drink; sealed preservation, long-term effective. [1] 

Six, the main use, degreasing rust is the paint before painting the workpiece processing, so that the adhesion of the paint on the workpiece stronger and better. General degreasing technology is with the phosphating together. Degreasing powder and agent.